Loading ...
Loading ...
Loading ...
10
NS-BK1TBK8
www.insigniaproducts.com
Assembling your kegerator
Installing the casters (optional)
1 Remove all contents from the kegerator, then tip it onto its side on a
soft surface to protect it from scratches.
2 Unscrew and remove the black front feet. Keep them in a safe place in
case you want to use the feet later.
3 Attach the two metal washers (included) to the locking casters to
prevent scratching the cabinet, then install the two locking casters in
the front positions on the bottom of the kegerator (closest to the
door).
4 Install the other two casters in the rear positions on the bottom of the
kegerator.
5 With all four casters tightened evenly, stand the unit in the upright
position.
6 Step on the front of the locking casters to lock the kegerator into place
or step on the back to unlock the kegerator.
Notes
• The kegerator should always be plugged into its own
individual electrical outlet which has a voltage rating that
matches the rating plate.
• We strongly recommend that you do not use an extension
cord. However, if you must use an extension cord, it is
absolutely essential that it be a UL/CUL-Listed, 3-wire
grounding type appliance extension cord having a
grounding type plug and outlet and that the electrical
rating of the cord be 115 volts and at least 10 amperes.
• Never unplug your kegerator by pulling on the power cord.
Always grip the plug firmly and pull straight out from the
outlet.
Casters
Front
Metal washers
Locking casters
Loading ...
Loading ...
Loading ...