Loading ...
Loading ...
Loading ...
Operation
. DISPENSING HOT WATER
WARNING: Hot water temperatures can reach above 194˚F/90˚C and produce severe scalding.
Never let children dispense water without direct adult supervision.
NOTE: The hot water temperature is factory set and cannot be adjusted.
. DISPENSING COLD WATER
1
2
2
4
4 5
3
3
Going Away On Vacation
When not using the dispenser for long periods of time or when going on vacation,
to conserve energy, unplug the dispenser and drain the reservoirs (see Draining
the Reservoirs). Follow Initial Product Cleaning Procedures upon return and
startup of the dispenser.
1
The temperature of the cold water reservoir is monitored by a cold water
control located at the rear of the dispenser. Using a screwdriver, turn the
dial clockwise between lower setting for warmer water and higher setting
for colder water until the desired temperature is reached. If water is not
being properly dispensed, there could be possible ice build-up in the
reservoir due to the thermostat being set too cold. If this happens, slowly
rotate the thermostat set screw counterclockwise to a warmer setting.
NOTE: Any change to the cold water temperature control may eect Energy Star eiciency.
Adjusting the Cold Water Temperature:
Loading ...
Loading ...
Loading ...