Hydro Smart HS120CON-LP 120K BTU Condensing Gas LP Microboiler

Installation Manual and Owner’s Guide - Page 60

For HS120CON-LP. Also, The document are for others Hydro Smart models: HS120CON-NG

PDF File Manual, 60 pages, Read Online | Download pdf file

HS120CON-LP photo
Loading ...
Loading ...
Loading ...
Owner's Guide
Page
60
Warranty
Freeze damage that occurs without taking proper preventive measures as described in the
installation manual.
Condensate damage due to improperly installed or lack of a condensate trap (drain).
Any product not installed in compliance with all applicable local & provincial codes, ordinances,
and good trade practices.
Any product sold to or installed in areas outside of the fty states (and the District of Columbia) of
the United States of America and Canada.
Any product installed in applications that cause the micro-boiler to activate more than 300 times
per day. (This averages to an activation every 5 minutes in a 24-hour period.)
Damages due to improper installation:
Gas: incorrect gas pipe sizing, incorrect gas meter sizing, incorrect gas type, and/or gas
pressures that fall outside the product's specied range.
Water: incorrect water pipe sizing, water pressures that fall outside the product's specied
range, recirculation ow rates that fall outside the product's specied range (air removal), and/
or lack of proper methods of air removal in a closed-loop, circulation system. (See installation
manual for details.)
Electric: supply power voltages that fall outside the product's specied range.
Damages due to water quality:
Introduction of liquids other than water or water / glycol mixtures into the product.
Introduction of pool water, spa water, or any chemically treated water into the product.
Introduction of hard water measuring more than 7 grains per gallon (120 ppm) for single
family domestic applications or more than 4 grains per gallon (70 ppm) for all other types of
applications into the product.
Introduction of untreated or poorly treated well water into the product.
Introduction of water with pH levels less than 6.5 and greater than 8.5 into the product.