WFE3BE User Manual

Loading ...

Adaptive Start

Adaptive Start is a predictive function that only modies Timer Mode operation. This

function models the heating characteristics of the room and uses that information to

pre-heat the room to ensure the target temperature has been reached by the start of

the Heating On period.

For example, with Adaptive Start o, the Heating On time is the time that the Heater

will begin to try and achieve the Target Temperature. With Adaptive Start On, the

Heater will begin to heat the room before the User-dened Heating On time so that

the Target Temperature is achieved when the User dened the Heating On start time.

To activate Adaptive Start:

• Hold ADV and MENU buttons for 2 seconds

• Use the arrow keys to highlight the adaptive start icon and conrm using the

ENTER key

• Use the arrow keys to toggle Adaptive Start ON or OFF

• Press ENTER to conrm your option and return to the home screen. If adaptive

start has been activated, the icon will be visible when in timer mode home screen.

NOTE:

This is a continuously learning

function and will be aected

daily by changes in the

heater’s environment. The

heater will take into account

the starting temperature

of the room so pre-heating

should remain accurate.

NOTE:

It is important that if multiple heaters are installed in one room that all heaters have the

Adaptive Start (AS) function enabled. If this is not the case, heaters with AS enabled will

pre-heat the room to the desired target temperature before the heaters with AS disabled

attempt to output heat.

It is likely that if multiple heaters are required in one room, that the output from one heater

may not be sucient to heat the room alone. This may cause the pre-heat time calculation

to extend to a large degree if the heaters do not all have AS enabled. This may lead to heat

at unwanted times and excessive wear to some heaters.

A two-hour limit is enforced on the calculation, however, if all heaters have AS enabled

and pre-heating takes over one-hour, extreme environmental factors may be aecting the

calculation or the heaters may be under sized for the room. Please contact us for support if

your pre-heat time seems excessive.

Loading ...

User Manual - Page 30