Loading ...
Loading ...
Loading ...
Additional
Safety Features
Press and hold for 2 seconds
to switch Sound On or O
Sound OFF icon
appears on
the display
Fig. 12
SWITCHING BETWEEN TEMPERATURE UNITS
To switch temperature from degrees Celsius to
degrees Fahrenheit and reverse press and hold ‘ ’
and ‘ ’ buttons together for 2 seconds, see Fig. 12.
This appliance incorporates a number of safety
devices. In addition to the ‘Important Safety Advice’
section your attention is drawn to the following:
SAFETY OVERHEAT PROTECTION
The heater is fitted with a thermal cutout which will switch
off the heater should it overheat for any reason. If the thermal
cutout operates, unplug the unit immediately. Allow the
heater to cool down completely and remove the cause of the
over heating.
TILT SWITCH
The product is fitted with a safety tilt switch which will prevent
the heater from working if the heater is accidentally tipped
over in any direction.
If the heater is tipped over while it is hot, disconnect the
power and allow it to cool, then stand the heater back upright.
Reconnect the power - normal operation should be resumed.
Note: The tilt switch mechanism makes a muted rattling
noise when the product is moved or tilted, this is not a fault,
this noise is normal.
IMPORTANT NOTES
Although this heater is manufactured to comply with the
relevant safety standards, certain types of carpets could
become discoloured by the temperatures under a portable
heater. If you are concerned about this, we recommend
that you contact the carpet manufacturer for guidance.
Alternatively, stand the heater on a suitable base to shield the
carpet – call our Helpline for further advice.
You may notice some parts of the element appearing to
be hotter from time to time because of the variable airflow
through the heater. This does not cause a safety hazard.
The heat outlet grille may become discoloured with use – this
is caused by airborne pollution and is not a fault.
STORAGE
If the radiator is not required for long periods, for example
during the summer, it should be stored in a dry place and
preferably covered to prevent the accumulation of dirt and
dust.
If left unplugged for a long duration, resetting the time and
the programmed settings will be necessary.
CLEANING
WARNING - ALWAYS DISCONNECT THE POWER SUPPLY
BEFORE CLEANING THE HEATER.
Do not use detergents, abrasive cleaning powder or polish of
any kind on the body of the heater.
Allow the heater to cool, then wipe with a dry cloth to remove
dust and a damp cloth (not wet) to clean off stains. Be careful
not to allow moisture in to the heater.
RECYCLING
For electrical products sold within the European
Community.
At the end of the electrical products useful life it
should not be disposed of with household waste.
Please recycle where facilities exist. Check with
your Local Authority or retailer for recycling advice in your
country. If you don't intend to keep the packaging of this
product for later use or storage, please dispose of it in an
eco-friendly way, please dispose of it in your recycling bin or
nearest recycling facility, thank you.
Loading ...
Loading ...
Loading ...