Loading ...
Loading ...
Loading ...
KEY LOCK
It is possible to lock the controls so that the settings cannot
be changed. To activate the key lock press and hold both ‘
’
and ‘ ’ buttons together for 2 seconds, see Fig. 10. The
Key Lock icon ‘ ’ will appear on the display. To unlock the
control repeat the action by pressing both ‘ ’ and ‘ ’
buttons for 2 seconds.
Note: The Standby button will still work when the Key Lock
is active. If the standby button is used again to re energise
the appliance then the last heat settings and key lock will still
be active.
Key Lock icon appears
on the display
Press and hold for 2 seconds
to activate the Key Lock mode
Fig. 10
SOUND ON/OFF
The heater creates the audible beeps when pressing
the buttons. To turn off the sound press and hold ‘
’ and ‘ ’ buttons together for 2 seconds, see Fig.
11. To turn on the sound you have to repeat the
action.
Sound OFF - product will not ‘beep’ on button
presses and icon ‘ ’will be illuminated.
Sound ON - product will ‘beep’ on button presses
and icon will be Off.
• It is possible to overlap programs. Example: Program
1 could be 13:00-17:00 at 22°C, Program 2 could be
15:00-22:00 at 25°C. In this case, the product will run
at 22°C from 13:00 until 15:00, at 15:00 program 2
will operate but only if set temperature of program
2 is greater than set temperature of program 1. If set
temperature of program 2 is lower than program 1,
then program 1 will run until 17:00 and then program
2 will run from 17:00 until 22:00.
• It is possible to make a mistake while setting up the
programs. If this happens you can hold the " "
button for 2 seconds to escape without saving
changes or hold the " " button for 2 seconds to
save what you have programmed and then go back
to edit the mistake.
• It is possible to manually change the set room
temperature of any auto program during the program
by using the or keys. This will have a
temporary effect and will not change the program
settings.
COPYING & PASTING AN AUTO PROGRAM
If you have set up an auto program for any one day and
would like to run the same program another day, you can
copy this day to the five weekdays, the two weekend days
or any other day. To do this, move to the day that you want
to copy, press and hold the ' ' button, "COPY" should
appear on the screen. Now use the or buttons to
select the day/group of days you want to paste to. Press
and hold the ' ' button and "PSTE" should appear on the
screen. Now your program has been copied.
ADAPTIVE START
Adaptive start is a function available for Auto
mode that ensures that the room temperature
has reached the desired room temperature at
the beginning of the programmed on period. it
will cause the product to switch on before the
scheduled on time to preheat the room.
This is a self learning function and will automatically
calculate the time it needs to switch on at based
on the desired room temperature and its current
environment.
Example:
In the timer menu, a set room temperature of
22°C is specified between 07:00 and 09:00. The
current room temperature is 17° C. The heating
device switches on early so that the specified room
temperature of 22° C is reached by 07:00.
• Use the ' ' key to select the operating mode
AUTO
• Press and hold the ' ' & ' ' keys for two
seconds
• Adaptive Start icon ' 'will appear on the
screen
• Activate / deactivate the function by repeating
the button press for two seconds.
Note: The appliance may not switch on early for
the first set auto program but the appliance will self
learn and switch on early for subsequent programs.
Press and hold for 2 seconds
to switch temperature
between °C and °F
Fig. 11
Loading ...
Loading ...
Loading ...