Loading ...
Loading ...
Loading ...
Page 8 of 8
200810
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails due
to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this lighting
fixture with the original sales receipt back to your nearest MENARDS retail store. At its discretion, PATRIOT
LIGHTING agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT
LIGHTING product or part free of charge, within the stated warranty period, when returned by the original purchaser
with original sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does
not cover damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to
persons/property or costs. This warranty does give you specific legal rights and you may have other rights, which vary
from state to state.
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
R
R
R
R
If unable to fix any of the above issues, please consult a certified electrician.
The light flashes once then
stay off in manual mode.
The light is very dim and goes
off quickly after motion has
stopped.
Light will not come on when
power is turned off.
The light is in battery backup mode.
The light flashes on and off.
Problem Possible Cause Solution
The motion sensor is detecting light from
the lamp heads.
Reposition the lamp heads to keep
the
area below the motion sensor
relatively dark.
Ensure power is turned on at the
light switch. Light will operate
normally once the power is back on.
Heat or light from the lamp heads may
be turning the motion sensor on and off.
Heat is being reflected from other objects
and may be turning the motion sensor on
and off.
The motion sensor is in “TEST” mode
and warming up.
Reposition the lamp heads away
from the motion sensor.
Decrease the “SENSITIVITY” setting
or reposition the motion sensor.
While in “TEST” mode, the light only
stays on for 5 seconds. Set the
“TIME” switch to 1min.2min.3min
The outside temperature is either too
hot or cold for the lithium battery to
operate safely.
The lithium battery charge is too low.
The lithium battery is no longer able to
hold a charge.
When the outside temperature is in
a safe range the lithium battery will
work correctly. power is back on.
When the lithium battery has been
charged to a safe level, the light will
work correctly.
If the battery will not charge after 7
days (with the light switch in the ON
position), then replace the battery
with a Li-ion, 18650-2000mAh, 3.7V
7.4wh battery with the correct
connector.
TROUBLE SHOOTING (CONTINUED)