Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/80606087-vwmb5080101/bg15.png)
Page 20
1. Have the remote control accessible. Set the
power switch on the vacuum to the remote
control position “
”. (fig. 1)
Fig. 1
2. Press the RESET button on the side of the
power head with pointed object such as
paper clip or a pen tip until the indicator
lights up. (fig. 2)
Fig. 2
3. Release the RESET button once the red
indicator light lights up and immediately
press and hold the “ON” button on the
remote control handle until the vacuum
powers on. (fig. 3)
Fig. 3
4. If the “ON” button is not pressed and held
within a 15 second window, the reset will
not be successful. Repeat steps 2-3 to
reset the remote control.
Changing The Battery – Replace Only With A
23AE 12V Alkaline Battery
1. Using a Phillips screwdriver, remove the
screws on the remote control. (fig. 1)
Fig. 1
ON
OFF
2. Slide back the remote cover so that the
white triangle on the remote cover points to
the unlock symbol “
” . (fig. 2 & 3)
Fig. 2 Fig. 3
ON
OFF
ON
OFF
3. Remove the remote cover from the handle.
(fig. 4)
Fig. 4
ON
OFF
RESETTING THE REMOTE CONTROL
Loading ...
Loading ...
Loading ...