Loading ...
Loading ...
Loading ...
Page 17
CARE & MAINTENANCE
WARNING:
ALWAYS DISCONNECT
THE PLUG FROM THE POWER OUTLET
BEFORE REMOVING THE POWER HEAD
FROM THE COLLECTION TANK.
1. Verify that the power cord is disconnected
from the outlet. (fig. 1)
Fig. 1
2. Disconnect the hose from the vacuum.
(fig. 2)
Fig. 2
3. Remove the vacuum from the mounting
rack.
4. Undo the latches and remove the power
head from the collection tank. (fig. 3)
Fig. 3
5. Clear all dirt or debris from the collection
tank and hose. (fig. 4)
Fig. 4
6. Check the hose, attachments, and power
cord to verify that they have not been
damaged.
IMPORTANT!
Clean or change the cartridge
filter regularly for best performance. ALWAYS
USE CARTRIDGE FILTER FOR DRY
VACUUMING. If the machine is used without
the cartridge filter, the motor will burn out and
the warranty will be voided. Always keep spare
cartridge filters on hand.
NOTICE!
The filters included are made of
high quality materials designed to stop small
dust particles. The cartridge filter should be
used for dry pick-up only. A dry cartridge filter
is necessary to pick up dust. If the cartridge
filter is wet, it will clog quickly and be difficult to
clean. Handle the filter carefully when removing
it for cleaning or replacing. Check the filters for
tears or small holes. A small hole can let dust
pass through and out of the cleaner. Do not
use a filter with holes or tears in it; replace it
immediately.
Loading ...
Loading ...
Loading ...