Loading ...
Loading ...
Loading ...
47
NS-FWM27W1
www.insigniaproducts.com
USER MAINTENANCE INSTRUCTIONS
Water leaks • Make sure that all hose connections are tight. See Step 2:
Connect the water hoses on page 22
and Step 3: Connect the drain hose on page 24.
• Make sure that the end of the drain hose is correctly inserted
and secured to the drainage system. See Step 3: Connect the
drain hose on page 24.
• Make sure that the drain hose is not clogged.
• Avoid overloading.
• Use a high-efficiency detergent to reduce over-sudsing. See
Step 1: Select a detergent on page 30.
Water overflows
from the bottom
of my washer.
• Make sure that the inlet hose is connected firmly.
• Make sure that the leak is not coming from the drain hose.
Replace the hose if needed.
No water or not
enough water
OR
Detergent or
softener is still in
its compartment
after the wash
cycle is
completed
• Make sure that both faucets are fully turned on.
• Make sure that the water pressure is in the range listed in Water
requirements on page 21.
• Make sure that the water inlet hoses aren’t kinked. Straighten if
necessary.
Washer vibrates
or is too noisy
• Make sure that your washer is set on a level surface. If the
surface isn’t level, adjust your washer’s feet to level your
washer. See Step 4: Level your washer
on page 28.
• Make sure that your washer isn’t touching any other object.
• Make sure that you remove the transport bolts.
Washer stops • Make sure that the power outlet is a working outlet.
• Close the door, then press the Start/Pause button to start your
washer. For your safety, your washer doesn’t spin unless the
door is closed.
• Sometimes your washer may pause between stages in the
cycle. Wait to see if your washer starts again.
• Check the fuse or reset the circuit breaker.
Washer doesn’t
drain or spin
• Close the door, then press the Start/Pause button to start your
washer. For your safety, your washer doesn’t spin unless the
door is closed.
• Make sure that the drain hose isn’t kinked. Straighten as
necessary.
• Make sure that the height of the drain hose is within specified
limits. See Drainage requirements on page 21.
• Check the fuse or reset the circuit breaker.
• The pipes to your sewer system may be clogged. Contact a
plumber or qualified repair professional.
There is soap
residue in the
drawer
• Clean the drawer.
• Use a liquid detergent.
PROBLEM SOLUTION
Loading ...
Loading ...
Loading ...