Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
28
www.insigniaproducts.com
Step 4: Level your washer
1 Make sure that the legs are flush with the washer cabinet. If needed, use a
wrench to loosen the lock nut on a leg, slide the leg up, then tighten the bolt.
2 Slide your washer into position.
3 Press the four top corners of your washer. If your washer moves when you
press a corner, the leg for that corner needs to be adjusted.
4 Loosen the lock nut on the bottom of your washer, pull the leg down until it
touches the floor, then tighten the nut. Extend the feet only as much as is
necessary. If the feet are extended too much, your washer may vibrate.
5 Press the four corners again to make sure that your washer is level. If your
washer is still not level, repeat step 4.
6 Use a level to make sure that all four sides of your washer are level.
CAUTION:
Don’t use your washer without leveling it. If your washer isn’t level, it may:
• Vibrate excessively which can cause your washer to malfunction
• Make excessive noise
Extend the leveling feet only as much as is necessary. If the feet are extended too
much, your washer may vibrate.
Loading ...
Loading ...
Loading ...