Loading ...
Loading ...
Loading ...
INSTALLATION INSTRUCTIONS
22
www.insigniaproducts.com
Step 2: Connect the water hoses
1 Connect the water hoses to the hot and cold water faucets.
2 Tighten the hose and faucet fittings by hand until they are snug. Tighten them
an additional two-thirds of a turn with pliers or a wrench. Pull the water supply
hoses downwards to make sure that they are connected securely.
3 Place the unconnected ends of the hoses into a bucket, then turn on the
faucets connected to the water supply hoses for 10 or 15 seconds to remove
any foreign substances. Turn off the faucets.
CAUTIONS:
• Use new water supply hoses. Using old hoses can result in leakage or overflow that
can damage your property.
• Don’t connect multiple water supply hoses together to increase the length of the
hose. Hoses connected this way can leak and cause electrical shock. If a hose is too
short, replace the hose with a longer, high-pressure hose.
CAUTION:
Don’t overtighten the fittings or apply tape or sealant to the faucets or water supply
intakes. This can damage the fittings.
Water supply hose
Water supply hose
Loading ...
Loading ...
Loading ...