Loading ...
Loading ...
Loading ...
8
Using the Remote Control
(continued)
NOTE:
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon zinc), or rechargeable (nicad, nimh, etc.) batteries.
2
Battery Replacement
3
Using the remote control
□
The operation of the remote control buttons work the
same as the buttons on the front panel of the
fireplace/heater. Review the Operation section for more
information on the functionality of these buttons.
NOTE: The remote control cannot lock/unlock
the flame and heating function, and it cannot
switch between Fahrenheit and Celsius
.
Care and Maintenance
WARNING: Always disconnect from the power supply
before cleaning the heater. First turn off the main
power. Then remove the electrical plug from the wall
outlet.
The blower motor and flame motor are pre-lubricated for a durable using time and need no further lubrication or maintenance.
To remove any accumulation of dust or debris, the soft brush attachment of a vacuum cleaner should occasionally be used to
clean the outlet grille of the fan heater.
□
Use a soft, clean cloth that will not scratch the surface when dusting.
□
Use a clean soft cloth dampened with warm water to clean the fireplace surface. DO NOT use household or abrasive
cleaners, as these products may damage the surface.
□
When cleaning the glass viewing screen use a non-abrasive damp cloth with liquid cleaner or soft soap if necessary; DO
NOT use cleaning powders or any other substance with abrasives since these substances will scratch glass.
□
Under no circumstances should this product be operated with a broken or chipped glass panel.
□
Do not strike or slam the glass.
□
In the event that your appliance is stained or otherwise damaged during use, we recommend that you call a professional
to repair it.
□
When not in use please unplug the cord from the outlet to prevent any damage or accidents.
WARNING: Do not use this fireplace insert if any part of it
has been under water. Immediately call a qualified
service technician to inspect the firebox and replace any
part of the electrical system which has been under water.
Heater Up
Main Power
Heater Control
Flames Control
Timer Control
Heater Down
WARNING:
Do not ingest batteries.
1.
Non-rechargeable batteries are not to be recharged.
2.
Batteries are to be inserted with the correct polarity.
3.
Exhausted batteries are to be removed from the product.
4.
Always purchase the correct size and grade of battery most suitable
for the intended use.
5.
Replace all batteries of a set at the same time.
6.
Clean the battery contacts and also those of the device prior to battery
installation.
7.
Remove batteries from equipment when not used for an extended period
of time.
NOTE:
Battery disposal
Please always dispose of batteries
at a suitable recycling point.
Loading ...
Loading ...