Use and Care Manual - Page 5

5

□ The control panel is located on the top left corner of

□ The function indicator (2) has three square LEDs – red,

Fahrenheit temperature heating function is running, the

green LED indicates that the Celsius temperature heating

function is running, and the blue LED indicates that the

timer function is engaged.

□ To the right of the three LEDs, is the infrared receiver

module which communicates with the remote control to

control the heater.

□ The timer button (3) allows you to set the amount of time you want the fireplace/heater to run. The timer button (3)

operates both the flames and the heater function. If the heater is operating when the timer is set, then the heater is on

the timer. If the flames are operating, then the timer will control the flames. If both the heater and flames are operating

with the timer set, then the timer controls both the flames and the heater. Pressing the button in sequence will set the

timer for a set interval. This interval period is shown in the display (1), and the blue LED light turns on to show that the

timer function is engaged. The set intervals are displayed in this table. The timer starts after you select your preferred

interval and release the button; note that the display and blue light will turn off after a few seconds. There is no clock

function for turning the heater or flames on or off at a specific time.