Loading ...
Loading ...
Loading ...
7
Operation (continued)
□
To unlock the flame function, press and hold the flame button (5) for five seconds. The log lights flash several times and
then both flame lights and log lights turn on.
6
Using the main power button
7
Using the Demo Mode
□
Press the power button (6) to turn the fireplace/heater
unit on and off. Press the power button (6) once to
turn the unit on. Press again to turn the unit off.
□
For Use in Retail Store.
□
Locate the rocker switch (shown below) on the back of
the fireplace. Flip switch to "I" position to turn demo
mode on. Flip switch to "O" position to turn demo mode
off. Turn on demo mode to deactivate the heater and all
front control panel buttons except the flame control
button. This fireplace is shipped with demo mode turned
off for normal customer usage.
Using the Remote Control
1
Installing the battery
For replacement batteries, use AAA batteries.
□
Press down and slide back cover off the battery compartment.
□
Insert two provided AAA batteries into the battery
compartment making sure that the ends of the
batteries with the negative (-) symbols are against
the springs in the battery compartment.
□
Replace the battery compartment cover, making
sure it snaps into position.
□
Turn the remote over and aim it towards the fireplace/heater unit.
□
Press the power button on the upper left, and see if the flames on the fireplace/heater turn on or off.
□
If nothing appears to happen, check to make sure the battery is installed correctly, and try again.
OPEN
CLOSE
6
1
5
Loading ...
Loading ...
Loading ...