Pleasant Hearth MWS-1800 Wood Burning Stove with Variable Speed Blower

User Manual - Page 13

For MWS-1800. Series: PH1800WS, MWS-1800, WSL-1800-B, WSL-1800, GWS-1800, GWS-1800-B

PDF File Manual, 69 pages, Read Online | Download pdf file

MWS-1800 photo
Loading ...
Loading ...
Loading ...
12
WOOD STOVE QUICK START GUIDE
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 877-447-4768 8:30 a.m. – 4:30 pm CST, Monday – Friday.
or email us at [email protected]
10
Slide Bafe Rod shown
in “CLOSED” postition.
ITEMS NEEDED FOR FIRST FIRE:
• 3 Pieces of Seasoned Split Wood 14 in. Long
• 2 Pieces of Seasoned Split Wood 18 in. Long
Once fire is fully burning, fully close and
latch stove door.
9
LATCH STOVE DOOR
CLOSED
8
REDUCE AIR CONTROL
Slide damper control to desired setting,
and leave stove door open 12 inches for
one minute.
OPENCLOSED
OPEN
CL
OSED
PU
LL
PUSH
Engagement
Pin
Slid
eB
af
fl
e
RodH an
dle
Always OPEN the Slide Baffle before opening the door to refuel the stove! This will prevent:
Spillage of smoke, flame and carbon monoxide
Spillage of sparks, coals and logs
Over-firing
Insure the slide baffle is in the CLOSED position after the Door is closed to activate the
Efficiency and Fuel Saving design of this stove.
DO NOT leave the stove unattended with the door open.
Starting a fire may not require an open door to draft. The air control should supply adequate
draft.
Pull Rod Handle out to rotate between
“CLOSED” and “OPEN” position.
“PUSH” Rod Handle in to lock in
position. Congratulations! Your wood
stove is ready for operation.
This wood heater needs periodic inspection and repair for
proper operation. It is against federal regulations to operate this
wood heater in a manner inconsistent with operating instructions
in this manual.
Efficiency, Heat Output, and Particulate Emissions:
The Weighted Average HHV Efficiency = 70.1%
The Sum of Weighted Particulate Emission = 2.18 grams/hour
Heat Output Range = 17,349 to 62,789 BTU/hour
WARNING! Risk of Fire
7
FUEL LOADING
CONFIGURATION
Configure the Fuel as Follows:
1. Position 3 logs approximately 12-14 inches
long front to back with gaps between the
pieces on top of the ember bed
2. Position 2 logs approximately 18 in. long side
to side on top of the first layer with the front
log back approximately 3 inches from the first
layer logs
Loading ...
Loading ...
Loading ...