Loading ...
Loading ...
Loading ...
7
6. Stand the washer/dryer upright
Tip the washer/dryer back to its upright position. Remove
and discard any remaining packaging material.
COMPLETE THE INSTALLATION
Follow the installation instructions that came with your model
to nish installing or reinstalling your washer/dryer (i.e., hoses,
vents, etc.).
NOTE: Be sure to remove the transport bolts from the back of
the washer.
7. Move close to nal location
Locate the 1/4" hex-head screws on the top of each pedestal
foot. Reach inside the pedestal and use a 1/4" hex-head ratchet
or open-end wrench to adjust the feet up or down as needed to
level the washer/dryer.
NOTE: Make sure all four pedestal feet are in solid contact with
the oor.
8. Check levelness of washer/
dryer
9. Adjust pedestal feet
Not Level
LEVEL
Not Level
Place level here
Place a level on top edges of washer/dryer, checking each
side and front. Rock washer/dryer back and forth to make
sure all four feet make solid contact with oor.
If not level, adjust pedestal feet up or down, repeating as
necessary.
Loading ...
Loading ...
Loading ...