Loading ...
Loading ...
Loading ...
6
3. Secure the pedestal
4. Align sides of pedestal
Position the pedestal toward the front of the washer/dryer and
install the two remaining hex-head sheet metal screws. Do not
tighten completely.
Align the sides of the pedestal so that they are even with the
sides of the washer/dryer. Reach inside the pedestal opening
and securely tighten all four pedestal screws.
2. Attach the pedestal
Move the pedestal against the washer/dryer bottom. Slide
the pedestal’s keyhole slots over the lower two partially
installed screws.
Partially install two of the #12 x 5/8" hex-head sheet metal
screws in the lower holes. Leave a space of about 3/8" (10 mm)
between the screw head and the bottom of the washer/dryer.
NOTE: If your washer/dryer has feet installed, remove them.
1. Prepare the washer/dryer
Dryer Bottom
Washer Bottom
INSTALLING THE PEDESTAL
1"
(25 mm)
5. Prepare pedestal feet
Using a 1/4" hex head ratchet or open-end wrench, lower the
feet approximately 1" (25 mm) away from the bottom of the
pedestal.
Loading ...
Loading ...
Loading ...