Loading ...
Loading ...
Loading ...
For the first self-clean cycle, we recommend
venting your kitchen with an open window or
using a ventilation fan or hood.
Remove racks, any broiler pan, broiler grid, all
cookware and any aluminum foil from the oven.
The shiny, silver-colored oven racks (on some
models) can be self-cleaned, but they will darken,
lose their luster and become hard to slide.
Soil on the front frame of the oven and outside
the gasket on the door will need to be cleaned
by hand. Clean these areas with hot water,
soap-filled scrubbing pads or cleansers such as
Soft Scrub
®
. Rinse well with clean water and dry.
Do not clean the gasket. The fiberglass material
of the oven door gasket cannot withstand
abrasion. It is essential for the gasket to remain
intact. If you notice it becoming worn or frayed,
replace it.
Wipe up any heavy spillovers on the oven
bottom.
Make sure the oven light bulb cover is in place
and the oven light is off.
IMPORTANT: The health of some birds is
extremely sensitive to the fumes given off
during the self-cleaning cycle of any oven.
Move birds to another well-ventilated room.
Touch the SELF CLEAN pad.
Touch the + or – pad to enter the desired
clean time, if a time other than 4 hours is
needed.
Clean cycle time is normally 4 hours. You can
change the clean time to any time between
3 hours and 5 hours, depending on how dirty
your oven is.
Touch the START pad.
The door locks automatically. The display
will show the clean time remaining. It will not
be possible to open the oven door until the
temperature drops below the lock temperature
and the LOCKED DOOR light goes off.
When the LOCKED DOOR light is off, open the
door.
The oven shuts off automatically when the
clean cycle is complete.
NOTES:
The words LOCK DOOR will flash and the
oven control will signal if you set the clean
cycle and forget to close the oven door.
To stop a clean cycle, touch the CLEAR/OFF
pad. When the LOCKED DOOR light goes
off indicating the oven has cooled below the
locking temperature, open the door.
Using the self-cleaning oven.
The oven door must be closed and all controls set correctly for the cycle to work properly.
Before a Clean Cycle
Wipe up heavy soil on the oven
bottom.
How to Set the Oven for Cleaning
Delay Start is setting the oven to start the clean
cycle automatically at a later time than the
present time of day.
NOTE: Before beginning, make sure the oven
clock shows the correct time of day.
Touch the SELF CLEAN pad.
Touch the + or – pad to enter the desired
clean time.
Touch the DELAY START pad. The earliest
start time you can set will appear in the
display.
Touch the + or – pad to enter the time of
day you want the clean cycle to start.
Touch the START pad.
The door locks automatically. The display will
show the start time. It will not be possible to
open the oven door until the temperature
drops below the lock temperature and the
LOCKED DOOR light goes off.
When the LOCKED DOOR light is off, open the
door.
NOTE:
You can find out when the clean cycle will
start by touching the DELAY START pad.
How to Delay the Start of Cleaning
18
Loading ...
Loading ...
Loading ...