Loading ...
Loading ...
Loading ...
Your pyrolytic oven is equipped with an oven door that can
be disassembled in order to clean all the panes of glass.
Positioning the door for dismantling
The door needs to be positioned at an angle to aid in the
disassembly of the panes.
• Open the oven door fully and ip out the hinge locating
tab to the open position.
• After the locating tab has been positioned, gently close
the oven door until it stops on the locating tab. The door
is now ready for dismantling.
Removing the top door trim
• Push in the 2 buttons on either side of the trim.
• Lift the trim away from the door.
Removing the glass panes
• Remove the 3 panes of glass starting with pane 1.
• When removing pane 3 ensure that the 2 rubber
supports are removed before cleaning.
Do not misplace them!
Cleaning the glass panes
Clean with a damp cloth.
Do not use scouring agents or abrasive sponges as these
could damage the reective surface.
Dry thoroughly before reassembly.
Replacing the glass panes
• Replace the glass panes back into the door starting with
pane 3.
• Ensure this pane is placed into the correct slot and that
the 2 rubber supports are in place.
• Next replace pane 2. There is a reective coating on this
pane. This coating is indicated by a circle printed on
its surface. Ensure this circle is in the same corner as
pictured below.
Circle in this corner
• Replace pane 1 ensuring the black screening is facing
inwards towards the oven.
Replacing the top door trim
Replace the trim ensuring the clips snap into the 2 location
holes. Flip the hinge locating tab back into its original
position and close the door.
Cleaning the pyrolytic oven door
(EPEE63AS model only)
28 cleaning the pyrolytic oven door (EPEE63AS model only) electrolux e:line ovens
Loading ...
Loading ...
Loading ...