Loading ...
Loading ...
Loading ...
electrolux e:line ovens removing and replacing the oven top light (EPEE63AS model only) 25
warning
IMPORTANT: Make sure the appliance is turned off
before you remove or replace parts, to avoid the
possibility of electric shock.
Removing and replacing the oven back light and
side light
• Turn oven light glass anticlockwise to remove it for globe
replacement.
• To remove side light, place a spoon under the light glass
and lever off. Replace globe and snap glass cover back
into position.
• A special high temperature resistant globe should be
used. This can be purchased from Electrolux Customer
Care Centre.
Releasing the grill element
We have designed the upper element with a rotating latch
to help you reach your oven roof for cleaning.
• Rotate latch until the element drops down freely.
• The top light is positioned behind the grill deector at the
top of the oven.
• To remove the globe the shelves should rst be removed
from the oven and the top element dropped down.
• Insert a small screwdriver into the glass cutout between
the two metal clips on the left hand side, as shown in
the diagram.
• Gently lever the glass cover off, by pushing the screw
driver in and moving it upwards, whilst holding the glass
cover with the other hand. (If not supported, the glass
cover may fall and break).
• Remove the faulty globe by pulling it directly out of
its holder.
• Replace the old globe with a new one, ensuring not to
directly touch the surface of the globe with your ngers,
(A tissue or soft cloth is best for this.)
• Pick up the glass cover and place short edge into right
side of housing; push up opposite end of glass cover
until it snaps into position.
• Resecure the top element in place.
Replacing the oven top light
(EPEE63AS model only)
Loading ...
Loading ...
Loading ...