Loading ...
Loading ...
Loading ...
numbers provided by the FCC or regional compliance markings,
as well as applicable product and licensing information.
1
Hold the touchscreen.
2
Select Settings > System > About.
Specifications
Battery type Rechargeable, built-in lithium-polymer battery
Battery life Up to 7 days in smartwatch mode (with heart rate)
Up to 5 hr. in GPS mode (with heart rate and
music playback)
Operating
temperature range
From -20º to 60ºC (from -4º to 140ºF)
Charging
temperature range
From 0º to 45ºC (from 32º to 113ºF)
Wireless
frequencies/
protocols
2.4 GHz @ 8 dBm nominal
• ANT+ wireless communications protocol
• Bluetooth 4.2 technology
• Wi‑Fi wireless technology
13.56 MHz @ -40 dBm nominal, NFC wireless
technology
Water rating Swim, 5 ATM*
*The device withstands pressure equivalent to a depth of 50 m.
For more information, go to www.garmin.com/waterrating.
Device Care
NOTICE
Avoid extreme shock and harsh treatment, because it can
degrade the life of the product.
Avoid pressing the keys under water.
Do not use a sharp object to clean the device.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Thoroughly rinse the device with fresh water after exposure to
chlorine, salt water, sunscreen, cosmetics, alcohol, or other
harsh chemicals. Prolonged exposure to these substances can
damage the case.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Cleaning the Device
NOTICE
Even small amounts of sweat or moisture can cause corrosion
of the electrical contacts when connected to a charger.
Corrosion can prevent charging and data transfer.
1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.
After cleaning, allow the device to dry completely.
TIP: For more information, go to www.garmin.com/fitandcare.
Replacing the Bands
The device is compatible with 20 mm wide, standard, quick-
release bands. Go to buy.garmin.com, or contact your Garmin
dealer for information about optional accessories.
1
Slide the quick-release pin on the spring bar to remove the
band.
2
Insert one side of the spring bar for the new band into the
device.
3
Slide the quick-release pin, and align the spring bar with the
opposite side of the device.
4
Repeat steps 1 through 3 to replace the other band.
Troubleshooting
Is my smartphone compatible with my
device?
The vívoactive device is compatible with smartphones using
Bluetooth wireless technology.
Go to www.garmin.com/ble for compatibility information.
My phone will not connect to the device
If your phone will not connect to the device, you can try these
tips.
• Turn off your smartphone and your device, and turn them
back on again.
• Enable Bluetooth technology on your smartphone.
• Update the Garmin Connect app to the latest version.
• Remove your device from the Garmin Connect app to retry
the pairing process.
If you are using an Apple device, you should also remove
your device from the Bluetooth settings on your smartphone.
• If you bought a new smartphone, remove your device from
the Garmin Connect app on the smartphone you intend to
stop using.
• Bring your smartphone within 10 m (33 ft.) of the device.
• On your smartphone, open the Garmin Connect app, select
or , and select Garmin Devices > Add Device to enter
pairing mode.
• Hold the touchscreen, and select Settings > Connectivity >
Phone > Pair Phone.
My headphones will not connect to the
device
If your headphones were previously connected to your
smartphone using Bluetooth technology, they may connect to
your smartphone before connecting to your device. You can try
these tips.
• Turn off Bluetooth technology on your smartphone.
Refer to the owner's manual for your smartphone for more
information.
• Stay 10 m (33 ft.) away from your smartphone while
connecting headphones to your device.
• Pair your headphones with your device (Connecting
Bluetooth Headphones, page 5).
My music cuts out or my headphones do not
stay connected
When using a vívoactive 3 Music device connected to
headphones using Bluetooth technology, the signal is strongest
when there is a direct line of sight between the device and the
antenna on the headphones.
Troubleshooting 21
Loading ...
Loading ...
Loading ...