VR1AM7040WG/AA User Manual

Loading ...

ENGLISH-17

About the boundary markers

To prevent the POWERbot from entering the following areas, place

the boundary markers on the oor in an shape at intervals of

about 5.9in (15cm).

About 5.9in

(15cm)

Boundary

markers

About 1.9in

(5cm)

About 5.9in (15cm)

Boundary

markers

Where a raised spot exceeds 1.9in (5cm) Where there is a slide, swing, replace, or any

ammable substance or moisture.

Above 0.6in (1.5cm)

boundary

markers

Boundary

markers

Where a threshold is higher than 0.6in (1.5cm) Where there is risk of falling such as near

stairs, porches, or guardrails.

Using Energy-saving mode

You can selectthe Energy-saving modeto save energy during battery charging.Energy-saving mode

turns off all functions except battery charging.Use it to reduce powerconsumptionwhile you are away

from home for an extended period of time.

How to select or cancel Displayed icon

Press for 5 sec.

 About 3seconds

later, the previous

indicator will

appear.

<SR1AM7010UW

series only>

Blinking Blinking

Note

f If you select the Auto/Max/Manual clean mode or press the Point cleaning button, the

Energy-saving mode will be cancelled.

f When Energy-saving mode is on, setting the schedule will cancel Energy-saving mode.

– If you select the Energy-saving mode after setting the schedule, the schedule will not be

cancelled.

f If the docking station is off, Energy-saving mode will be cancelled.

1_VR7000_EN_DJ68-00763C-06_USA.indd 17 2017-05-19 오후 5:05:46

Loading ...

User Manual - Page 17