Loading ...
Loading ...
Loading ...
9
SETTING UP
This is going to be easy.
1. Unpack Your pureAir 3000
Remove everything from the box. Check and make sure you have everything
listed in “PRODUCT CONTENTS” on page 2. Keep your packaging in case you
need to return or exchange your purifier. When you are satisfied with your
purifier, please recycle the box and properly dispose of all other packaging
materials.
2. Select a Location for Your pureAir 3000
There are several things to consider when selecting a location. First, find a
common room that contains an HVAC return or adjoining a hallway that has an
HVAC return. Ideally, locate the purifier within twelve to twenty four inches (12”-
24”) of the ceiling, on a bookcase, shelf, or mounting bracket. Make sure that
there is nothing within three inches (3”) of the rear of the purifier for proper air
flow. Point the purifier towards the center of the room. Never place an operating
purifier on the floor.
3. Place Your pureAir 3000 and Plug it In
Check to make sure your purifier is secure. Falling purifiers can cause serious
headaches! Unravel the cord attached to your DC POWER ADAPTER and your
POWER CORD. Plug the DC POWER ADAPTER PLUG into the rear of the purifier,
then plug the POWER CORD into the wall. Make sure the POWER CORD is
securely seated in the DC POWER ADAPTER and that the green indicator light on
the DC POWER ADAPTER is lit, showing that it properly connected.
MAINTENANCE REMINDERS
“REPLACE CELL”
When “REPLACE CELL” appears, the PCO CELL has stopped functioning (burned out)
and must be replaced. Contact your dealer or www.GreenTechEnv.com/Support to
order a replacement. Once a replacement has been obtained, follow the instructions
in “DISASSEMBLY” and “ASSEMBLY” (pages 12-15) to replace your old PCO CELL.
Note that the PCO CELL relies upon ultraviolet (UV) energy to power the catalytic
reaction. Over time, the UV energy output degrades. For this reason, the PCO CELL
should be replaced after one (1) year of continuous operation (9000 hours) regardless
of the presence of the “REPLACE CELL” maintenance reminder.
“PERFORM CLEANING”
“PERFORM CLEANING” will display once the purifier has been run for 30 days total
running time and the purifier requires a complete cleaning. Follow the instructions in
“CLEANING” on page 16.
Loading ...
Loading ...
Loading ...