TL-200 User Manual

Loading ...

TurboLock TL - 200 19

Step 7. Add batteries to the battery compartment, then slide the cover down over it. The lock should now be ready to use.

It’s highly recommended to use the keys, default password, and the app to test the lock to make sure it works

before closing the door. See Section 6 for information on the default admin password. See Section 8 for information

on the app.

Section 5

Using the Lock

In general, there are two simple ways to unlock your door via the lock other than using the keys.

Option 1

Via the keypad. Press any key so that the keypad lights up, use the keypad to enter a password, and then enter ‘#’. The lock

will engage.

Option 2

Via the app. With the app open, press any key so that the keypad lights up. The lock will engage and you may receive in-app

notication or sound to indicate that the lock was used.

Note, regardless of method, the TL-200 will not lock again on its own. To lock the door, close it, press any key so that the

keypad lights up, and then press ‘

’. The lock will engage and lock the door.

For more details regarding various entry methods, see the following information.

Using the Admin Password

Touch any key so that the keypad lights up, enter the Admin Password, and then press ‘#’. The lock will engage allowing you to

open the door. Note, the Admin Password must be changed from the default password. See Section 6.

Loading ...

User Manual - Page 19