Loading ...
Loading ...
Loading ...
10 TurboLock TL - 200
Step 2. Remove the battery cover from the inside section of the lock and adjust the switch and thumb turn as needed.
3.2 Main Installation
Step 1. Start with the outside section. Feed the power cables under the latch and
thread the latch pin and two of the pegs through the latch; the third and
lowest peg should be under the latch. If needed, have someone hold the
door itself or hold the outside section at against the front of the door. (Fig. 4)
• It’s highly recommended to leave the door open and keep the keys in the
lock during installation.
• Make sure the power cables are under the latch.
2
3/4
”
2
3/8
”
Left Side Door
Back switch pushed
to L side + thumb turn
vertical
Right Side Door
Back switch pushed
to R side + thumb turn
horizontal
L R
L R
L R
L R
Outside
Section
Outside
Section
(Fig. 4)
Silicone Backing
Latch Pin
Loading ...
Loading ...
Loading ...