Loading ...
Loading ...
Loading ...
TurboLock TL - 200 13
Step 7. Add batteries to the battery compartment, then slide the cover down over it. The lock should now be ready to use.
It’s highly recommended to use the keys, default password, and the app to test the lock to make sure it works
before closing the door. See Section 6 for information on the default admin password. See Section 8 for information
on the app.
Section 4
Installation (New)
This section details installation steps needed if you are installing the TL-200 on a door without a cutout. If you are using
the TL-200 to replace an old lock or if your door otherwise already has a cutout, please go back to page 8.
• For easier installation, have another person help to hold the lock etc.
• For your convenience, installation instructions are broken into segments. Read and follow the instructions for both Pre-
Installation and Main Installation.
4.1 Pre-Installation
Part 1 Making the Opening
Step 1. Using the provided template, mark the locations for the
centers of the backset and the latch hole.
Step 2. Bore a 54mm (about 2” or 2 1/8”) hole on the door face,
then drill a 25mm (about 1”) hole into the edge of the door
so that it intersects with the larger hole.
2” dia. hole
7/8” to 1” dia. hole
Backset
Latch Hole
Side Hole
Loading ...
Loading ...
Loading ...