Loading ...
Loading ...
Loading ...
12
What to check prior to installation
Follow this process
!
●
The water supply valve may have different shapes depending on the installation
condition.
●
The filter may be located close to the water source or back of the product
depending on the situation.
Water
inlet:Connectthewatertapadaptortothewa
tersupply
c
onn
e
ction
p
o
r
t
near
the
water
supply
v
al
v
e
.
Drain connect: 3/4” FPT(NPT)
-
-
In order to guarantee optimal operation of the product, consult with our
technicians on how to install the product. (Contact our authorized
technicianswhen moving the product after the initial installation.)
-
Be sure to connect the water supply adaptor to the cold water drainage pipe.
-
The ice maker provides optimal functionality at a room temperature of 50-
68°F and supplied water temperature of lower than 50°F.
There may be some water inside the product, which is from the test
procedure of the manufacturing process.
It does not mean that the product has been used prior to installation, so rest
assured that you have a new product.
Avoid uneven surfaces or places with too much moisture,
direct sunlight, too much dust, or spattering water.
Water inlet: Connect the water tap adaptor to the water
supply connection port near the water supply valve.
Drain connect: 3/4” FPT(NPT)
Loading ...
Loading ...
Loading ...