Loading ...
Loading ...
Loading ...
49-80778
13
INSTALLATION PREPARATION
Installation Preparation
PREPARE FOR CABINET INSTALLATION
1. Insert the damper assembly into the hood
exhaust duct.
2. The hood should be centered left to right over the
cooktop.
NOTE: The exhaust duct on the hood is closer to
the rear of the hood. It is important to plan for the
alignment to the connection point of the hood.
3. The back surface of the hood must be 1"
minimum from the back wall. The front surface
of the hood must be 3" minimum from the front
custom cabinet panel.
4. The metal liner should be used when the
hood installation height is less than 30". The
liner dimensions are provided in the Product
Dimensions section.
5. The electrical receptacle location maximum
dimension is shown here.
6. The custom cabinet should provide for removal
of panels to provide access to the electrical cord
plug and to the ducting and its connection to the
hood in case of any need for servicing or other
reasons.
PREPARE FOR ISLAND INSTALLATION
1. Insert the damper assembly into the hood
exhaust duct.
2. The hood should be centered left to right over the
cooktop.
NOTE: The exhaust duct on the hood is closer to
the rear of the hood.
The front to back location of the hood over
the cooktop can be chosen by the installer
or homeowner.The island duct run is usually
centered over the cooktop and it is important to
plan for the alignment to the connection point of
the hood.
4. The metal liner should be used when the
hood installation height is less than 30". The
liner dimensions are provided in the Product
Dimensions section.
5. Locate the electrical receptacle in the cabinetry
or area above the hood so that it complies with
local and electrical codes.
6. The custom cabinet should provide for removal
of panels to provide access to the electrical cord
plug and to the ducting and its connection to the
hood in case of any need for servicing or other
reasons.
33-7/16"
9/16"
9/16"
Loading ...
Loading ...
Loading ...