Loading ...
Loading ...
Loading ...
33
Oven Controls
10. To cancel Steam Clean at any time press STOP.
Notes:
• Opening oven door during Steam Clean cycle prevents the
water from reaching the temperature needed to clean.
• For best results, clean oven immediately after the cycle is
complete. Steam clean works best for soils on the oven
bottom.
• Place a paper towel or cloth in front of the oven to capture
any water that may spill while wiping out.
• A non abrasive scouring pad, stainless steel sponge, plastic
scraper, or eraser style cleaning pad (without cleaner) can
be used for difficult soils. Moisten pads with water before
use.
• Do not leave the residual water in the oven for any length
of time.
• Some condensation or water vapor may appear close to the
oven vent. This is normal. The oven gasket may become
damp; do not wipe dry.
• Local water sources often contain minerals (hard water). If
hard water deposits occur, wipe cavity with a 50/50
solution of water and vinegar or 50/50 solution of lemon
juice and water.
• Steam clean cannot be programmed with a delay start.
• If Steam Clean results are not satisfactory, run a Self Clean.
See “Setting Self Clean” on page 31.
Figure 13: Clean around the oven door gasket
Loading ...
Loading ...
Loading ...