Loading ...
Loading ...
Loading ...
CONTROL PANEL
DAILY USE
SWITCHING THE HOB ON/OFF
To switch the hob on, keep button “A“ pressed for approx. 2 seconds.
The 4 cooking zone displays show “0“. If within 20 seconds none of the
cooking zones is activated, the hob switches o automatically as a safety
precaution.
SWITCHING ON AND ADJUSTING COOKING ZONES
Press one of the buttons “B“ corresponding to the cooking zone you
intend to use. Select the heat setting required with buttons “E“ or “C“.
The other selectable cooking settings go from 1 to 9. Press buttons “+/−“
at the same time to cancel all settings.
IMPORTANT: the control is deactivated 10 seconds after the heat setting has
been selected.
To change the heat setting, rst press the selection button “B“ again, then
proceed to change the setting, using buttons “E“ or “C“.
TIMER
To set the Timer function, select the desired cooking zone and power
setting then press the cooking zone key again and a luminous dot
will appear on the display of the timer-controlled cooking zone. The
indication “00“ blinks on the 2 displays. Press buttons “C“ or “E“ to set
the time from 1 to 99.
IMPORTANT: after 10 seconds the timer displays will show the power
setting of the other cooking zones.
To view the remaining cooking time, press the timer-controlled cooking
zone key twice.
A FUNCTION
This function allows to automatically decrease the cooking zone power
level from the highest value (level 9) to the one selected by the user for
a later stage of cooking.
To activate this function rst press the “+“ button when level 9 is reached.
The display shows “A“ and “9“ ashes alternately with low brightness.
At this point, choose the desired power level (less than 9) with the “–“
button.
“A“ and selected level ash alternately with low brightness on the display.
The function is activated once “A“ and the selected level ash alternately
with high brightness on the display.
Once “A“ is no longer visible on the display (the “A“ function switches o
automatically after several minutes, depending on the set power level),
the cooking process continues with lower power and the display shows
only the selected power level.
N.B.: this function is not possible with level 9.
KEY LOCK
The Key lock function is switched on by holding down button “D“ until
a dot lights up above the function button. The control panel is locked
except for the switching-o function. The function remains on even after
the hob is switched o and on again and can be deactivated by pressing
button “D“ again until the dot above the function button goes o.
When the hob is o with the key lock activated to switch the hob on, rst
deactivate the key lock function by pressing button “D“ again until the
dot above the function button goes o.
The presence of water, liquid spilled from pots or any objects resting on
the controls can accidentally activate or deactivate the Key lock function.
RESIDUAL HEAT INDICATOR
When the cooking zone is switched o, the residual heat indicator “H“
remains on or ashes alternating with “0“ until the temperature of the
hob returns within safety levels.
IMPORTANT: The hob’s safety features include an automatic switching
o function. Prolonged use of the same heat setting triggers automatic
switch-o of the cooking zone (for example, after around 1 hour at
maximum heat setting, the cooking zone switches o).
IMPORTANT: To avoid a permanent damage the hob:
• do not use pots with bottoms that are not at;
• do not use metal pots with enamelled bottom;
• do not place hot pots/pans over the control panel.
FIRST TIME USE
Upon rst installation, the control panel performs a functional test for
about 1 second, after which it automatically switches to the “Key lock”
function.
To deactivate the function, press and hold button “D”; an acoustic signal
will sound and the corresponding led will turn o.
NOTE: If a reset occurs, repeat the procedure described above.
E
C
D
A
B
A On/O
B Cooking zone and timer selection
C-E Heat setting increase and decrease
D Key lock
EN
Loading ...
Loading ...
Loading ...