Loading ...
Loading ...
Loading ...
47
Insignia 24" 1080p LED TV
www.insigniaproducts.com
Note: If the problem is not solved by using these troubleshooting
instructions, turn off your TV, then turn it on again.
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions
Tuner
Inputs
Outputs
After Auto Channel
Search, there are no
channels.
• Reception can vary by channel depending on the
broadcast power level of a given station. Contact
your cable or satellite TV provider.
• Make sure that the antenna or cable/satellite TV
is connected securely to your TV.
• Try replacing the cable between the
antenna/cable or cable/satellite box and your
TV.
One or more channels
do not display.
• Make sure that the channels are not blocked. See
“Setting parental control levels
” on page 32.
• Make sure that the channels are not hidden. The
channel may have been deleted from the
channel list. You can tune to the channel by
pressing the number buttons or you can add the
channel back to the channel list. See “Hiding
channels” on page 27.
• If you are using a cable or satellite box, use the
remote that came with that box to change
channels.
• Make sure that you have the correct input
selected to view channels from the cable or
satellite box.
• If you are using an antenna, the digital channel
signal may be low. To check the digital channel
signal strength, see “Checking the digital signal
strength” on page 29.
Password is lost.
•Enter 9999 to access parental controls, then set
a new password. See “Setting or changing the
password” on page 30.
Some settings cannot be
accessed.
• If a setting is grayed, the setting is not available
in the current video input mode.
TV cabinet creaks.
• When the TV is in use, the temperature rises
naturally and may cause the cabinet to expand
or contract which can cause a creaking noise.
This is not a malfunction.
Control buttons do not
work.
• Make sure that the Button Lock option is set to
Off. See “Locking control buttons” on page 31.
• Unplug the power cord, wait a few seconds, then
plug the cord back in and turn on your TV.
TV keeps turning off.
• Make sure that the sleep timer is not turned on.
See “Setting the sleep timer” on page 37.
Problem Solution
Without stand
22.31 × 14.44 × 1.63 in.
(56.68 × 36.67 × 4.13 cm)
7.93 lbs. (3.6 kg)
With stand
22.31 × 16.01 × 5.71 in.
(56.68 × 40.67 × 14.5 cm)
8.26 lbs. (3.75 kg)
Screen size measured
diagonally
23.6 in.
Display type LED
Panel 60 Hz vs.120 Hz 60Hz
Display resolution 1080p
Panel resolution 1920 (H) × 1080 (V)
Aspect ratio 16:9
Contrast ratio (typical)–panel 1000:1
Dynamic contrast ratio–
list value
4500:1
Brightness (center typical)
cd/m2
250 nits
Comb filter 3d y/c digital
Response time 5 ms
Horizontal viewing angle 150
Vertical viewing angle 140
HDMI 1080p, 1080i, 720p, 480p, 480i
Component video 1080i, 720p, 480p, 480i
Analog NTSC
Digital ATSC, 8-VSB, Clear-QAM
HDMI
2 (side)
E-EDID compliant
HDCP compliant
Component video 1 (back)
Composite video
1 (back)
Share with Component-Y
Shared audio (component
and composite)
Yes
S-Video No
PC/VGA 1 (back)
3.5mm PC audio input 1 (side)
DVI 1 (side) (HDMI 1/DVI jack)
USB
1 (side)
Supports JPEG and firmware upgrade
Video No
Analog audio/headphone 1 (side)
Digital audio 1 (back)
WiFi No
Ethernet No
Loading ...
Loading ...
Loading ...