Loading ...
Loading ...
Loading ...
• Front turn signal lamp
Replacing front clearance and identification lamp bulbs
To change the cab marker bulbs:
1. Make sure the headlamp control
is in the OFF position and then
remove the screw and lens from the
lamp assembly.
2. Carefully pull the bulb straight
out of the socket and push in the
new bulb.
3. Install lens on lamp assembly with
screw.
Replacing brake/tail/rear turn signal/back-up/license plate lamp
bulbs
The brake/tail/rear turn
signal/back-up/license plate lamp
bulbs are located in the same
portion of the rear lamp assembly.
Follow the same steps to replace
any of these bulbs:
1. Make sure the headlamp and turn
signal controls are in the OFF
position and then remove the trim
cover around the bulb to be
replaced.
2. Carefully pull the bulb out, unplug the bulb and plug in the new bulb.
3. Install the trim cover on the lamp assembly.
2009 Low Cab Forward Truck (lcf)
Supplement
USA (fus)
Lights
49
Loading ...
Loading ...
Loading ...