Loading ...
Loading ...
Loading ...
TIRE INFORMATION
Inflation
WARNING: Always maintain your tires in good condition.
Frequently check and maintain correct inflation pressures as
specified by tire manufacturers. Inspect periodically for abnormal wear
patterns and repair/replace cut or broken tire casing. Always use
experienced, trained personnel with proper equipment and correct
procedures to mount or remove tires and wheels. Failure to adhere to
these warnings could result in wheel or tire malfunction, damage to
your vehicle, personal injury, or death.
WARNING: To avoid personal injury or death, always follow
these instructions when mounting radial tires on wheels:
• Only personnel that have had proper training and experience should
mount or remove tires from rims or wheels.
• Use only heavy-duty rims or approved rims for radial tires. It may be
necessary to contact your wheel and rim distributor to determine if
your rims are approved for radial tires.
• If a tube is to be used, make sure special radial tire tubes are used
because of the increased flexing of the sidewalls on radial tires.
• Never use anti-freeze, silicones, or petroleum based lubricants when
mounting radial tires. Only an approved lubricant should be used as
an aid for mounting tires.
• Always inflate tires in a safety cage.
• Do not attempt to mix stud piloted wheels or fasteners with hub
piloted wheels or fasteners. To do so may cause premature wheel
failure resulting in property damage, personal injury, or death.
•
Do no mix foreign (not made in North America) wheel mounting parts
with domestic (made in North America) parts. Many foreign wheel
components look similar to, but not exactly the same as domestic
made components. Mixing components could cause wheel or fastener
failures and result in property damage, personal injury, or death.
• Do not change from aluminum wheels to steel wheels or vice-versa
without changing the mounting hardware where required or, in some
cases with flange nut mounting systems, changing the hub and stud
assembly. Mixing components could cause wheel or fastener failures
and result in property damage, personal injury, or death.
2009 Low Cab Forward Truck (lcf)
Supplement
USA (fus)
Maintenance and Specifications
170
Loading ...
Loading ...
Loading ...