Loading ...
Loading ...
Loading ...
16
17
10-20 secs
21 secs
If you see a solid ‘E’ when trying to use
the machine, it shows the machine has
stopped functioning correctly.
Make sure you have checked the following:
The room temperature is above 5°C/ 41°F.
There are no blockages in the inlet grille or loop amplifier outlet.
The filter has been correctly assembled and doesn’t need to be replaced.
The appliance is correctly plugged in directly to the wall outlet.
If the message still displays, unplug and leave for 10 seconds before turning
on again. If the problem persists, please call the Dyson Helpline.
If you see a flashing ‘E’ when trying to
use the machine, it is unable to do what
has been requested.
Press and hold the ON/ OFF button
on the machine for longer than
20 seconds.
It is possible to remove your network details from the machine.
The Wi-Fi symbol will flash alternately between
white and green to indicate that your network
details have been removed.
Wi-Fi can be enabled or disabled by pressing and holding the ON/OFF button
on the machine for between 10 and 20 seconds.
Wi-Fi disabled Wi-Fi enabled
If Wi-Fi is disabled, the machine will not connect to the Dyson Link app.
If you clear your network settings the machine will not connect to the Dyson Link app.
Enabling or Disabling Wi-Fi
Clearing your Wi-Fi settings
Troubleshooting
Control remoto
El control remoto se acopla en forma magnética.
Coloque el control remoto en la parte superior del
aparato con los botones hacia abajo.
Para utilizar el
aparato, apunte el
control remoto al
frente de la base.
Modo en espera
activado/
desactivado
Control del flujo
de aire
Modo automático
Temporizador
Modo enfocado
Modo de oscilación
activado/
desactivado
Modo de difusor
Modo nocturno
Control del
termostato
Modo de
enfriamiento
Luz verde
intermitente =
Luz blanca
intermitente =
Luz blanca
sólida =
Apagado =
Blanco
sólido =
La aplicación Dyson Link también se puede usar para
controlar el equipo.
Luz verde
sólida =
Apagado =
Apagado = el
Roja constante =
Luz blanca
sólida =
Blanca
constante =
Mostrar iconos
Cómo configurar la aplicación Dyson Link
El aparato puede ser mejorado al conectarlo con la aplicación Dyson Link en su equipo inteligente.
Product SSID
XXXXX-XXX-XX-XXXXXXXX-XXXX
Product Wi-Fi Password
XXXXXXXX
Mac address
XX:XX:X X:XX:X X:XX
Seleccione "Add a Product" (Agregar
un producto) dentro de la aplicación
y siga las instrucciones en pantalla.
Descargue la aplicación Dyson Link,
disponible en iOS y Android.
Para conectar el aparato,
necesitará la información
que aparece al frente de
este manual.
Flashing
green =
Off =
Flashing
white =
Solid
white =
Wi-Fi connected
Wi-Fi connecting
Wi-Fi is ready to connect
to your Dyson Link app
Wi-Fi disabled
el Wi-Fi ya está conectado con
la aplicación Dyson Link
el Wi-Fi está conectándose
el Wi-Fi está conectado
el Wi-Fi está desactivado
el objetivo de limpieza/calidad
del aire no se ha cumplido
limpio/se cumplió el objetivo
de calidad del aire
el aparato no está en modo
de limpieza automática
el aparato está calentando
el aparato alcanzó la
temperatura objetivo
el aparato está en modo
nocturno
aparato no está en modo
nocturno
Loading ...
Loading ...
Loading ...