Loading ...
Loading ...
Loading ...
14
15
6 sec
1 2 3
4 5 6
7 8 9
clik
clik
10 11 12
13
clik
clik
When your non-washable filter unit needs replacing the machine
will display the pattern shown. To replace the non-washable filter
unit, follow these steps. If the machine has been in use, leave for
1 to 2 hours before replacing the filter unit to allow the machine
to cool down completely. Your Dyson machine is programmed
to remind you to replace the filter unit after 12 months based on
12 hours usage a day. Please note your indicator will activate
sooner with more use. The indicator is only a guide and you may
need to replace the filter unit more regularly.
Replacing the filter unit
A clockwise-rotating loading pattern
will be shown on the LED display.
Once the loading pattern is complete,
the machine will return to its normal
usage.
When you have re-assembled your machine, press and hold the ‘Standby ON/OFF’
button for 6 seconds on the remote control to reset the filter indicator.
The Dyson Link app will notify you when your non-washable filter needs to be replaced.
The filter indicator can also be reset from within the Dyson Link app.
Replacing the filter unit
Clean the hatch every time the filter
is replaced. Open the small hatch on
the side of the machine. Use a cotton
swab to clean inside and remove any
debris. This maintains sensor accuracy
and ensures the continuing high
performance of the machine.
Loading ...
Loading ...
Loading ...