User Manual - Page 38

For S3BF.

Loading ...
Loading ...
Loading ...
38 OPERATION
NOTE
•To verify the Wi-Fi connection, check that Wi-Fi ( )
icon on the control panel is lit.
•The appliance supports 2.4 GHz Wi-Fi networks only.
To check your network frequency, contact your Internet
service provider or refer to your wireless router manual.
•LG SmartThinQ is not responsible for any network
connection problems or any faults, malfunctions, or
errors caused by network connection.
•If the appliance is having trouble connecting to the Wi-
Fi network, it may be too far from the router. Purchase
a Wi-Fi repeater (range extender) to improve the Wi-Fi
signal strength.
•The Wi-Fi connection may not connect or may be
interrupted because of the home network environment.
•The network connection may not work properly
depending on the Internet service provider.
•The surrounding wireless environment can make the
wireless network service run slowly.
•The appliance cannot be registered due to problems
with the wireless signal transmission. Unplug the
appliance and wait about a minute before trying again.
•If the firewall on your wireless router is enabled, disable
the firewall or add an exception to it.
•The wireless network name (SSID) should be a
combination of English letters and numbers. (Do not
use special characters.)
•Smartphone user interface (UI) may vary depending
on the mobile operating system (OS) and the
manufacturer.
•If the security protocol of the router is set to WEP,
you may fail to set up the network. Please change it to
other security protocols (WPA2 is recommended) and
register the product again.
•If you change your wireless router, your Internet
service provider or your password after registering the
appliance, please delete it from the LG SmartThinQ
Settings
Edit Product and register again.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping,
and handling) upon email request to opensource@lge.
com. This offer is valid for three (3) years from the date
on which you purchased the product.
Loading ...
Loading ...
Loading ...