1. Home
  2. LG Electronics
  3. LG Electronics S3BF User Manual
  4. Page 19

User Manual - Page 19

For S3BF.

Loading ...
Loading ...
Loading ...
ENGLISH
19INSTALLATION
ASSEMBLING THE DRIP TRAY
Before using the Styler, insert the drip tray onto
the bottom of the cabinet.
1 Holdthetraysothearrowandletteron
thefrontofthetrayfaceup.
2 Insertonesideofthetrayrst,then
theother.Pushthetrayuntilitslides
completely in.
3 Todetach,pullonesideoutthentheother.
If the tray collects water, detach it and empty
the water. After emptying it, re-assemble the
tray.
• Do not operate the Styler without
installing the drip tray.
Doing so could lead
to water damage caused by leaking.
INSTALLING CAP COVERS
1 Lineupthenubsonthecap
cover with the holes in the top
cornerofthecabinet.
2 Snapthecapcoverintoplace.
Repeatwiththeremainingcap
cover on the other corner.
INSTALLING HINGE COVERS
1 Open the Styler door.
2 Snapthehingecoverontothelowerhinge
assemblywiththebentedgeonthefar
sidefromthehinge.
3 Repeatwiththeremaininghingecoveron
theupperhingeassembly.
Loading ...
Loading ...
Loading ...