Loading ...
Loading ...
Loading ...
Plug the oven into an electrical outlet. A beep will sound and the display will read “0000” then “0:00”.
GETTING STARTED
•
•
Press continuously or the arrows or until the required power level is displayed.
There are 5 power levels to choose from - 100%, 80%, 50%, 30%, 10%. Refer to the following page for a guide
on how to select the right power level.
Select the Power Level
Enter the Cook Time
Press the arrows or until the required time is displayed.
Start Cooking
Press to start cooking.
The clock will start counting down to 0 and a beep will sound 5 times once cooking is nished.
Notes:
To stop the microwave before the end of the cook time, press the STOP/CLEAR key.
If the door is opened during cooking/defrosting to stir or turn the food, the cook time on the display stops
automatically. The time will start to count down again once the door is closed and the key is pressed.
Refer to the next page for a guide on cook times and power levels for dierent foods
•
•
The cook time can be can be programmed for up to 95 minutes (95:00) and can be entered in the following
increments
5
•
SETTING THE CLOCK
TO COOK/DEFROST MANUALLY
2. Press or to adjust the hour gure until the correct hour is displayed and then press to
1. Press once. The hour gure will ash.
This is a 24 hour clock. To set the clock
conrm the hour gure. The minute gure will now ash.
3. Press or to adjust the minute gure until the correct minute is displayed and then press
to conrm the setting.
If the STOP/CLEAR key is pressed while setting the clock, the oven will go back to the previous setting.
If the electrical power supply to your microwave oven is interrupted, the display will show “0:00” after the power
is reinstated. The time of day will also be erased.
Notes:
Cooking Time Increasing Unit
0 – 1 minute 5 seconds
1 – 5 minutes 10 seconds
5 – 10 minutes 30 seconds
10 – 30 minutes
1 minute
30 – 95 minutes 5 minutes
•
CLOCK
CLOCK
CLOCK
MICRO.POWER
After cooking, END will show in the display window. Once the microwave door has been opened or the STOP/
CLEAR key has been pressed, the time of day will show in the display window, providing the clock has been set.
Loading ...
Loading ...
Loading ...