Loading ...
Loading ...
Loading ...
65
STARTING THE ENGINE
Procedure for Starting a Cold Engine
NOTE: (A) - top view of the choke lever; (B) - choke button
2
1
3
A B
1. Place the transmission in neutral and reset the parking brake.
2. Turn the fuel tank valve to ON.
3. Sit on the vehicle.
4. Move the choke to the FULL (1) position.
5. Turn the engine stop switch to RUN.
6. Turn the ignition key to ON and press the starter button.
7. On models with a push/pullchoke, the choke is on “FULL”when
the knob is pulled out all the way. The choke is “OFF” when the
knob is pushed in. This is a variable choke and can be adjusted
gradually, depending on how much choke is needed for
starting.
Never run an engine in an enclosed area. Carbon monox-
ide exhaust gas is poisonous and can cause severe injury
or death. Always start engines outdoors.
You must allow your vehicle adequate warm u p time before
operating or engine damage could result.
Loading ...
Loading ...
Loading ...