Loading ...
Loading ...
Loading ...
53
CONTROL AND PARTS FUNCTIONS
Engage the Demand 4 Drive switch before getting into condi-
tions where front wheel drive m ay be needed. If the rear
wheels are spinning, release the throttle before turning the
Demand 4 Drive switch on.
Disengaging Wheel Hubs
When backing up while in Demand 4 Drive and then going forward,
one or both hubs may remain engaged. If one or both hubs remain
engaged they can be disengaged by stopping, shiftingto and mov-
ing in reverse. Then proceed in forward again.
You can tell if only one front hub is engaged if the handlebars pull
to one side. If both front wheel hubs are engaged, steering effort
increases but remains balanced from left to right, and vehicle
speed is somewhat restricted.
NOTE: If the hubs remain engaged after following these instruc-
tions return the ATV to your dealer for service.
If both hubs were engaged and only one released during op-
eration, loss of control could result. If you experience hub en-
gaging symptoms, use the above disengaging technique be-
fore proceeding. Failure to disengage front hubs as directed
above could result in severe injury or death.
Loading ...
Loading ...
Loading ...