Loading ...
Loading ...
Loading ...
112
MAINTENANCE
Handlebar Adjustment
Your ATV has handlebars
which can be adjusted for
your personal fit.
1. Locate handlebar bolts.
On models with a head-
light pod, it will be neces-
sary to remove the upper
headlight pod. On other
models remove the han-
dlebar cover.
2. Loosen the four bolts.
3. Adjust handlebar to de-
sired height. Be sure han-
dlebars do not hit gas tank
or any other part of ma-
chine when turned fully to
left or right.
4. Torque handlebar adjuster
block bolts to 10 to 12 ft.
lbs.
NOTE: Tighten bolts so there is an equal gap at the front and rear
of the handlebar block. Improper gap will result in improper fit of
upper pod.
Improper adjustment of the handlebars or incorrect torquing of
the adjuster block tightening bolts can cause limited steering o r
loosening of the handlebars,resulting in loss of controland pos-
sible serious personal injury or death.
Loading ...
Loading ...
Loading ...