Loading ...
Loading ...
Loading ...
17-02-2003
To disarm external type protection
only
• see "Disarming" section.
Note: if you wish to charge or replace
the battery:
• Turn on the ignition.
• You have 10 seconds after turning
on the ignition to press the internal
protection switch 1 and hold it
down for two seconds.
• The warning light flashes rapidly
for three seconds.
• Disconnect the battery.
• After reconnecting the battery,
lock, then unlock the vehicle using
the remote control.
YOUR 406 IN DETAIL
107
To set the alarm to external
protection only
If you want to leave a window
partially open, or a pet inside the
vehicle, you need to select external
protection only:
• Switch off the ignition.
• Within the next ten seconds, press
the internal protection button 1
until the light comes on.
• Get out of the vehicle.
• Press the locking button on the
remote control.
• The doors lock.
• The direction indicators light for
two seconds.
• The red light on the switch flashes
once a second.
Do not make any modifi-
cations to the alarm sys-
tem, this could cause
faults.
Loading ...
Loading ...
Loading ...