Loading ...
Loading ...
Loading ...
CAREAN#CLEANINQ
RemovableParts
CLEANING MATERIALS
= Dishwashing detergent
o Warm water
° Scouring pad or soap-filled pad
Bump in
Rack Guide
Raised Back
of the Rack
TO REMOVE
1. Fully open the
door
e
Push the hinge
locks down
toward the door
frame, to the
unlocked Slot
position,
This may
require a
flat-blade
screwdriver
Hinge Lock
(Unlocked
Position)
Hinge Arm
TO REMOVE
1, Pull the racks out to the stop lock
position
2. Pull up the front of the rack and
slide under the bump of the rack
guide
TO CLEAN
Clean with warm water and detergent
For hard to remove stains, gently scrub
with a scouring pad or a soap-filled
pad Rinse wel! Gray porcelain-coated
oven racks may be cleaned in the oven
during the self-clean cycle
TO REPLACE
1, Place the raised back of the rack
onto the rack guides
2. Lift the front of the rack until the
raised back slides under the bump
of the rack guides
3, Slide the rack all the way back
23
=
4_
=
Firmly grasp both
sides of the door
at the top,
Close door to the
door removal
position, which is
halfway between
the broil stop
and fully closed
Lift door up Removal Position
and out until the
hinge arm is clear
of the slot,
TO REPLACE
_t
2_
Firmly grasp both Bottom Hinge
sides of the door Edge of Arm
Slot
at the top
With the door at
the same angle
as the removal
position, seat the
indentation of the
hinge arm into
the bottom edge of
the hinge slot The
notch in the hinge
arm must be fully
seated into the
bottom of the slot
Indentation
Loading ...
Loading ...
Loading ...