Loading ...
Loading ...
Loading ...
Open the trunk.
Remove the light assembly cover
by pulling its outside edge.
Determine which of the three
bulbs is burned out: stop/taillight/
side marker, back-up or turn
signal.
Remove the socket by turning it
one-quarter turn counterclockwise.
Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
Turn on the lights to make sure
the new bulb is working.
Install the light assembly cover.
Make sure it snaps into place.
1.
3.
2.
4.
5.
6.
7.
Lights
Maintenance
Replacing Rear Bulbs
348
COVER
Main Menu
Table of Content
Loading ...
Loading ...
Loading ...