Loading ...
Loading ...
Loading ...
Torque the spark plug. (If you do
not have a torque wrench, tighten
the spark plug two-thirds of a turn
after it contacts the cylinder head.)
Tightening torque:
Put the new spark plug into the
socket, then screw it into the hole.
Screw it in by hand so you do not
crossthread it.
Use a wrench to remove the
hexagonsocketheadcapbolt
holding the ignition coil. Remove
the ignition coil by pulling it
straight out.
Remove the spark plug with
a five-eighths inch (16 mm) spark
plug socket.
6. 7.4.
5.
Spark Plugs (6-cylinder Models)
Maintenance
322
HEXAGON SOCKET HEAD CAP BOLT
13 lbf·ft (18 N·m , 1.8 kgf·m)
Main Menu
Table of Content
Loading ...
Loading ...
Loading ...