Loading ...
Loading ...
Loading ...
The fluid level should be between
theMINandMAXmarksontheside
of the reservoir. If the level is at or
below the MIN mark, your brake
system needs attention. Have the
brake system inspected for leaks or
worn brake pads.
Always use Honda Heavy Duty
Brake Fluid DOT 3. If it is not
available, you should use only DOT 3
or DOT 4 fluid, from a sealed
container, as a temporary
replacement. However, the use of
any non-Honda brake fluid can cause
corrosion and decrease the life of the
system. Have the brake system
flushed and refilled with Honda
Heavy Duty Brake Fluid DOT 3 as
soon as possible.
Check the fluid level in the reser-
voirs monthly. There are up to two
reservoirs, depending on the model.
They are:
Brake fluid reservoir (all models)
Clutch fluid reservoir
(manual transmission only)
The brake fluid should be replaced
according to the time recommenda-
tion in the maintenance schedule.
Pour the fluid slowly and carefully so
you do not spill. Clean up any spills
immediately. Spilled fluid could
damage components in the engine
compartment.
Brake fluid marked DOT 5 is not
compatible with your car’s braking
system and can cause extensive
damage.
Brake System
Brake and Clutch Fluid
Maintenance
313
MAX
MIN
Main Menu
Table of Content
Loading ...
Loading ...
Loading ...