Loading ...
Loading ...
Loading ...
Rails en
23
Refitting the shelf supports
The shelf supports are designed to fit on either the right-
or the left-hand side (not both).For each of the shelf
supports, make sure that the hooks at the back are at
the top.
1. First, push the shelf support into the middle of the
rear socket ‚ until the shelf support rests against the
cooking compartment wall, and then push it back ƒ
(fig. !).
2. Then push the shelf support into the front socket „
until the shelf support also rests against the cooking
compartment wall, and then press it downwards …
(fig. ").
Fitting and removing the pull-out rails
On appliance models with shelf supports, you must
change the basic settings to "Telescopic rails: Yes".For
more information, refer to the "Basic settings" section.
~ Page 18
If necessary, you can use pull-out rails on all levels.
If your appliance features the EcoClean Direct cleaning
function, you will need to take the entire shelf supports
for fitting and removing the pull-out rails out of the
cooking compartment. Otherwise, the EcoClean Direct
coating may be damaged.
If your appliance features the pyrolytic self-cleaning
function, you will need to take the pull-out rails out of
the cooking compartment before running the cleaning
function.The pull-out rails are not suitable for pyrolytic
self-cleaning.
Notes
■ Only use the pull-out rails in conjunction with the
universal pan, baking tray, wire rack and
accessories that are placed on the wire rack. All
other accessories are unsuitable.
■ The pull-out rails are not suitable for appliances with
a microwave function.
:Warning – Risk of burns!
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep children
away from the appliance.
Removing the pull-out rails
1. Push on the tab marked "PUSH" behind the end of
the rail, and push the rail away from you (fig. !).
2. Keep the "PUSH" tab pushed back and swing the rail
out (fig. ").
3. Pull the rail out towards you until the retainer at the
back unhooks (fig. #).
4. Remove the pull-out rail (fig. $).
Use washing-up liquid and a sponge to clean the pull-
out rails. For stubborn dirt deposits, use a brush.
G
F
2
E
D
1
1
2
I
Loading ...
Loading ...
Loading ...