Loading ...
Loading ...
Loading ...
en Basic settings
18
QBasic settings
Ba s i c set t i ngs
There are various settings available to you in order to
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
--------
Changing the basic settings
The function selector must be set to the "Off" position.
1. Press and hold the v button for approx. 4 seconds.
The first basic setting will appear on the display,
e.g. ™‚ ‚.
2. Use the A or @ button to change the setting if
necessary.
3. Press the v button to confirm.
The next basic setting will appear on the display.
4. Using the v button, continue going through all the
basic settings as described above, changing the
settings if necessary using the A or @ button.
5. When you have finished, press and hold the
v button again for approx. 4 seconds to confirm the
settings.
All basic settings have now been applied.
You can change the basic settings again at any time.
Note: Following a power failure, the basic factory
settings will be restored.
Basic setting Options
™‚ Display the time ‹ = Hide the time
‚ = Display the time*
™ƒ Audible signal duration
upon completion of a cook-
ing time or timer duration
‚ = Approx. 10 seconds
ƒ = Approx. 30 seconds*
„ = Approx. 2 minutes
™„ Button tone that sounds
when a button is touched
‹ = off
‚ = on*
™… Cooling fan run-on time ‚ = Short
ƒ = Medium
„ = Long*
… = Extra long
™† Amount of time until a set-
ting is applied
‚ = Approx. 3 seconds*
ƒ = Approx. 6 seconds
„ = Approx. 10 seconds
™‡ Enable childproof lock acti-
vation
‹ = No
‚ = Yes*
™ˆ Water hardness** ‹ = softened
‚ = soft (up to 1.3 mmol/l)
ƒ = medium (1.3 - 2.5 mmol/l)
„ = hard (2.5 - 3.8 mmol/l)
… = very hard* (above 3.8 mmol/
l)
* Factory setting (factory settings may vary depending on the appli-
ance model)
** Not available for all appliance types.
Loading ...
Loading ...
Loading ...