Loading ...
Loading ...
Loading ...
35-watt bulb, H8.
1. Insert the screwdriver from the onboard
vehicle tool kit, with the flat side on the clip,
arrow 1.
2. Turn the screwdriver by 90°, arrow 2.
3. Remove the front fog lamp toward the
front.
4. Detach the connector.
5. Turn the bulb bracket and remove it.
6. Remove the bulb and replace it.
7. Proceed in reverse order to insert the front
fog lamp. Note the guide rails in doing so.
LED front fog lights
These front fog lights are made using LED
technology. Contact your service center in the
event of a malfunction.
Turn signal
Note
Follow general instructions, refer to page 218.
The turn signals are located next to each low
beam in the engine compartment.
21-watt bulb, PY 21W.
Replacement
1.
Open the hood, refer to page 208.
2. Turn the bulb with the socket counter‐
clockwise and carefully remove.
3. Push the bulb down slightly and unscrew
from the socket.
4. To insert the new bulb, proceed in reverse
order of removal.
Turn signal in exterior mirror
The turn signals in the exterior mirrors feature
LED technology. Contact your service center
in the event of a malfunction.
Seite 221
Replacing components Mobility
221
Online Edition for Part no. 01 40 2 960 386 - II/15
Loading ...
Loading ...
Loading ...